
Products
View our full range of insulation products and accessories here.
Walls
ECO/CT
Full Fill Cavity Walls
An engineered system providing added resilience against increases in wind-driven rain resulting from climate change.
CavityTherm 360 is a bio-enhanced high performance composite board of enhanced PIR with a Lambda value as low as 0.020 W/mK for full fill cavity wall applications.
ECO/CT Benefits
-
Bio-enhanced PIR insulation
-
Halogen free
-
Low VOCs
-
Enhanced performance as low as 0.020 W/mK
-
Bio-degradable packaging – Reduced packaging materials
-
Moisture directed to outer surface
-
Fully engineered jointing
-
Fully recyclable HIPs facer provides wind-driven rain protection
-
Wide range of system compatible accessories that build to a system
ECO/CT Specifications
Thermal Conductivity | 0.020 W/mK |
Facings | Composite Foil/Engineered Hips |
Core | Bio-enhanced PIR Insulation |
Board Size | 1200mm x 450mm |
Board Thickness | 110, 125, 150mm |
Board Profile | Rebate Edge |
Preformed Corner | Yes |
ECO/CW
Partial Fill Cavity Walls
Cavity Wall 360 is a bio-enhanced partial fill wall insulation system. The system incorporates robust facings, engineered jointing details, preformed corners and has a Lambda of 0.020 W/mK.
Cavity Wall 360 is an environmentally sound choice for Passive and low energy builds. It can achieve a Passive U-Value of 0.15 W/m2K in a traditional cavity wall. When building with Cavity Wall 360 a residual cavity is maintained, offering excellent protection against winddriven rain..
ECO/CW Benefits
-
Bio-enhanced PIR insulation
-
Halogen free
-
Low VOCs
-
Enhanced performance as low as 0.020 W/mK
-
Bio-degradable packaging
-
Clear cavity maintained
-
Lower Lambda value for improved U-Values
ECO/CW Specifications
Thermal Conductivity | 0.020 W/mK |
Facings | Composite Foil/Engineered Hips |
Core | Bio-enhanced PIR Insulation |
Board Size | 1200mm x 450mm |
Board Thickness | 100, 110mm |
Board Profile | Rebate Edge |
Preformed Corner | Yes |
CT/PIR
Full Fill Cavity Walls
CavityTherm is an innovative built-in insulation for traditional walls that achieves Passive level U-Values as low as 0.12 W/m2K with excellent Thermal Bridging detailing in cavities up to 150mm wide.
CT/PIR Key Features
-
Verified EPD available
-
Engineered HIPs facer provides wind driven rain protection
-
Moisture redirected to outer surface
-
Prepositioned slots for sloping wall ties – no creep
-
Fully engineered jointing – no reliance on taping
-
Full range of accessory pieces build continuous system
-
Excellent Thermal Bridging Values
CT/PIR Specifications
Thermal Conductivity | 0.021 W/mK |
Facings | Composite Foil/Engineered Hips |
Core | PIR Insulation |
Board Size | 1200mm x 450mm |
Board Thickness | 100, 110, 125, 150mm |
Board Profile | Rebate Edge |
Preformed Corner | Yes |
XT/CWP (T&G)
Partial Fill Cavity Walls
Partial Fill Cavity Wall Plus (T&G) builds to a system thanks to its engineered tongue and grooved joints and pre-formed corners, ensuring insulation continuity and minimising of thermal bridging.
Cavity Wall Plus (T&G) is the best solution when building traditional masonry walls to the highest thermal standards whilst maintaining a residual cavity, offering excellent protection from wind driven rain. The lower Lambda of 0.021 W/mK improves U-Values and meets Future Homes Standard, proving an excellent choice for passive and low energy builds.
XT/CWP (T&G) Key Features
-
Verified EPD available
-
Improved lambda value of 0.021 W/mK
-
Robust tongue & groove jointing
-
Preformed corner panels & cavity closers: Reduced Thermal Bridging
-
Suitable to be used in conjunction with cavity closers reducing Thermal Bridging
-
Full range of accessory pieces build continuous system
-
Clear cavity maintained
-
No exposure restrictions
XT/CWP (T&G) Specifications
BBA Certified Thermal Conductivity | 0.021 W/mK |
Facings | Low emissivity foil facings |
Core | Enhanced PIR Insulation |
Board Size | 1200mm x 450mm |
Board Thickness | 50, 60, 70, 75, 80, 100mm |
Board Profile | Tongue & Groove |
Preformed Corner | Yes |
SR/CW
Partial Fill Cavity Walls
Safe-R Partial Fill Cavity Wall
Insulation for traditional masonry
walls, achieves excellent U-Values
whilst maintaining a residual
cavity, offering protection from
wind driven rain.
SR/CW Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) D-s1, d0
-
Clear Cavity Maintained
-
Protection from Wind Driven Rain
-
Lower Lambda value for improved U-Values
SR/CW Specifications
BBA Certified Thermal Conductivity | 0.020 – 0.021 W/mK |
Facings | Low emissivity foil facings |
Core | Phenolic Insulation |
Board Size | 1200mm x 450mm |
Board Thickness | 50, 60, 75, 80, 100mm |
Board Profile | Square Edge |
XT/CW
Partial Fill Cavity Walls
Cavity Wall for use in traditional masonry walls, builds to the highest thermal standards whilst maintaining a residual cavity, offering protection from wind driven rain
XT/CW Key Features
-
Verified EPD available
-
Clear Cavity Maintained
-
No exposure restrictions
-
Low emissivity foil facings
XT/CW Specifications
BBA Certified Thermal Conductivity | 0.022 W/mK |
Facings | Low emissivity foil facings |
Core | PIR Insulation |
Board Size | 1200mm x 450mm |
Board Thickness | 60, 70, 80, 90, 100, 110, 120, 125mm |
Board Profile | Square Edge |
SR/TB
Drylining Walls Fixed with Adhesive Dabs
Safe-R Thermal Board (Dot & Dab) is a composite insulated panel of Xtratherm phenolic insulation core with a glass tissue facing bonded to 12.5mm tapered edge plasterboard for internal applications, fixed with proprietary adhesive bonding.
The product should be installed with the joints sealed and taped in accordance with drylining best practice.
SR/TB Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) B-s1, d0
-
Responsive insulation system
-
High levels of insulation and drylining in one fix
-
Suitable for new build and renovation
SR/TB Specifications
Thermal Conductivity | 0.020 – 0.023 (W/mK) (Phenolic only) |
Facings | Glass Tissue/Plasterboard |
Core | Phenolic Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 37.5, 50.5, 62.5, 72.5, 82.5mm (Thickness includes 12.5mm plasterboard) |
Board Profile | Square Edge |
Plasterboard | Tapered Edge |
SR/TB-MF
Drylining Walls – Mechanically Fixed
Safe-R Thermal Board (Mechanically Fixed) is a composite insulated panel of Xtratherm phenolic insulation core with a composite foil facing bonded to 12.5mm tapered edge plasterboard for internal walls, sloped roofs and ceilings. SR/TB-MF is only suitable for mechanically fixed applications.
The product should be installed
with the joints sealed and taped in
accordance with drylining best practice.
SR/TB-MF Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) B-s1, d0
-
Insulation and drylining in one application
-
Reduced insulation thickness
-
Suitable for a variety of wall types
-
Cost Effective Solution in refurbishment and new build
SR/TB-MF Specifications
Thermal Conductivity | 0.020 – 0.023 (W/mK) (Phenolic only) |
Facings | Facings Composite Foil/Plasterboard |
Core | Phenolic Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 37.5, 52.5, 62.5, 72.5, 82.5mm (Thickness includes 12.5mm plasterboard) |
Board Profile | Square Edge |
Plasterboard | Tapered Edge |
XT/TL
Drylining Walls Fixed with Adhesive Dabs
Thin-R Thermal Liner (Dot & Dab) is a composite insulated panel of Unilin PIR insulation core with a composite kraft facing bonded to 12.5mm tapered edge plasterboard for internal applications, fixed with proprietary adhesive bonding.
XT/TL Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) B-s1, d0
-
Insulation & Drylining in one application
-
Provides effective vapour control layer
-
Reduced insulation thickness
-
Suitable for a variety of wall types
-
Cost effective solution in refurbishment and new build
XT/TL Specifications
BBA Certified Thermal Conductivity | 0.022 W/mK |
Facings | Composite Kraft/Plasterboard |
Core | PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 37.5, 50.5, 62.5, 72.5, 82.5 and 92.5mm (Thickness includes 12.5mm plasterboard) |
Board Profile | Square Edge |
Plasterboard | Tapered Edge |
XT/TL-MF
Drylining Walls – Mechanically Fixed
Thin-R Thermal Liner (Mechanically Fixed) is a composite insulated panel of Unilin PIR insulation core with a composite foil facing bonded to 12.5mm tapered edge plasterboard for internal walls, sloped roofs and ceilings. This product is only suitable for mechanically fixed applications
XT/TL-MF Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) B-s1, d0
-
Insulation & Drylining in one application
-
Provides effective vapour control layer
-
Reduced insulation thickness
-
Suitable for a variety of wall types
-
Cost effective solution in refurbishment and new build
XT/TL-MF Specifications
BBA Certified Thermal Conductivity | 0.022 W/mK |
Facings | Composite Kraft/Plasterboard |
Core | PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 37.5, 42.5, 52.5, 62.5, 72.5, 82.5, 92.5, 102.5, 112.5mm (Thickness includes 12.5mm plasterboard) |
Board Profile | Square Edge |
Plasterboard | Tapered Edge |
SR/FB
Steel & Timber Frame
Safe-R Framing Board is designed for use with steel or timber frame applications up to 18m in height (11m in Scotland). With a Euroclass B Fire Classification the framing board can be used between studs or as an insulated sheathing board. Using Safe-R Framing Board provides excellent U-Values and improved Thermal Bridging detailing
The use of combustible insulation is restricted on high buildings and buildings of a certain use. Regulations will differ regionally. Seek the guidance of the project architect or engineer before proceeding.
SR/FB Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) B-s1, d0
-
Suitable for use in steel and timber frame systems up to 18m in height (11m in Scotland)
-
Lower lambda value for improved U-Values
-
Reduced Thermal Bridging
SR/FB Specifications
BBA Certified Thermal Conductivity | 0.020 – 0.021 W/mK |
Facings | Low emissivity foil facings |
Core | Phenolic Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 50, 60, 75, 80, 100, 120, 140mm |
Board Profile | Square Edge |
XO/FB
Steel & Timber Frame
XtroLiner Framing Board is designed for use in a wide range of construction including steel or timber frame applications up to 18m in height (11m in Scotland). The framing board can be used between studs or as an insulated sheathing board. Using XtroLiner Framing Board in this application will reduce the Thermal Bridging of the steel or timber studs.
The use of combustible insulation is restricted on high buildings and buildings of a certain use. Regulations will differ regionally. Seek the guidance of the project architect or engineer before proceeding.
XO/FB Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) C-s2, d0
-
Suitable for use in steel and timber frame systems.
-
Lower lambda value for improved U-Values
-
Suitable for new build and renovation up to 18m in height (11m in Scotland)
-
Reduced Thermal Bridging
-
Robust textured foil
XO/FB Specifications
BBA Certified Thermal Conductivity | 0.021 W/mK |
Facings | Robust low emissivity foil facings |
Core | Superior Performance PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 50, 60, 75, 80, 100, 120, 140mm |
Board Profile | Square Edge |
XT/TF
Timber Framed Walls
Timber Frame construction is a fast, systematic method that results in high performing buildings with regard to energy efficiency and in environmental terms.
Unilin’s Timber Frame Systems bring timber framed wall insulation performance to new levels, surpassing the default values asked for in current building regulations. Using this product in timber framed walls helps achieve Future Homes Standard and Passive House Standards.
XT/TF Key Features
-
Verified EPD available
-
Rapid build system
-
Approved for use with fibre in stud
-
Suitable for new build and renovation
-
Reduced insulation thickness
-
Low emissivity foil facings
XT/TF Specifications
BBA Certified Thermal Conductivity | 0.022 W/mK |
Facings | Low emissivity foil facings |
Core | PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 25, 30, 40, 50, 60, 70, 75, 80, 90, 100, 110, 125, 150mm |
Board Profile | Square Edge |
Pitched Roofs
ECO/MA
Pitched Roofs
Bio-enhanced, superior performance PIR insulation suitable for pitched roofs (ventilated, hybrid or warm). ECO360 MA for roofs offers excellent insulation performance with a thermal conductivity as low as 0.020 W/mK.
Using pioneering environmentally conscious technology, ECO360 MA in roof applications will reduce heat loss while also delivering excellent Thermal Bridging details
ECO/MA Key Features
-
Bio-enhanced PIR insulation
-
Halogen free
-
Low VOCs
-
Enhanced performance as low as 0.020 W/mK
-
Bio-degradable packaging – Reduced packaging materials
-
High compressive strength
ECO/MA Specifications
Thermal Conductivity | As low as 0.020 W/mK |
Facings | Textured robust low emissivity foil facings |
Core | Bio-enhanced PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 50, 100, 125, 150mm |
Board Profile | Square Edge |
ECO/MA
Sarking Warm Roof Construction
Bio-enhanced, superior performance PIR insulation suitable for solid and suspended floors. ECO360 MA for floors offers excellent insulation performance with a thermal conductivity of 0.020 W/mK.
This bio-enhanced insulation will significantly improve the U-Value of new and existing floors. It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for floor insulation
ECO/MA Key Features
-
Bio-enhanced PIR insulation
-
Halogen free
-
Low VOCs
-
Enhanced performance as low as 0.020 W/mK
-
Bio-degradable packaging – Reduced packaging materials
-
High compressive strength
-
Suitable for pitched roofs
ECO/MA Specifications
Thermal Conductivity | 0.020 W/mK |
Facings | Textured robust low emissivity foil facings |
Core | Bio-enhanced PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 100, 125, 150mm |
Board Profile | Square Edge |
XO/PR
Pitched Roofs
XtroLiner Pitched Roof on sloped roofs (ventilated, hybrid or warm) provides the most efficient U-Values with minimal intrusion into valuable living space.
The roof construction is a critical element in the building fabric and is an area at high risk of heat loss. Using XtroLiner Pitched Roof will reduce heat loss while also delivering excellent Thermal Bridging details.
XO/PR Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) C-s2, d0
-
Reduces intrusion into living area
-
Reduced risk of condensation
-
Robust foil facings
-
Lightweight and easy to install
-
Reduced Thermal Bridging
XO/PR Specifications
BBA Certified Thermal Conductivity | 0.021 W/mK |
Facings | Robust low emissivity foil facings |
Core | Superior Performance PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 25, 40, 50, 60, 70, 75, 80, 100, 120mm |
Board Profile | Square Edge |
XO/SK (T&G)
Sarking Warm Roof Construction
XtroLiner Sarking (T&G) is an engineered tongue and grooved external roof insulation system with robust facings which meets the passive U-Value of 0.15 W/m2K.
Using this product improves detailing, speeds up the installation process and provides a uniform plane to detail more effectively. Creating a warm roof reduces the normal amount of junctions prone to Thermal Bridging greatly improving the thermal performance of the roof.
XO/SK (T&G) Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) C-s2, d0
-
Robust tongue & groove jointing
-
Reduced risk of condensation
-
Avoids intrusion into living area
-
Excellent U-Value in roofs
-
Reduced Thermal Bridging
XO/SK (T&G) Specifications
BBA Certified Thermal Conductivity | 0.021 W/mK |
Facings | Robust low emissivity foil facings |
Core | Superior Performance PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 50, 75, 100, 125mm |
Board Profile | Tongue & Groove |
XT/PR_UF (ROOFS)
Pitched Roofs
Thin-R Pitched Roof on sloped roofs (ventilated, hybrid or warm) provides the most efficient U-Values with minimal intrusion into valuable living space.
The roof construction is a critical element in the building fabric and is an area at high risk of heat loss. Using this product will reduce heat loss while also delivering excellent Thermal Bridging details.
XT/PR_UF (ROOFS) Key Features
-
Verified EPD available
-
Avoids intrusion into living area
-
Reduced risk of condensation
-
Low emissivity foil facings
-
Lightweight and easy to install
-
Reduced Thermal Bridging
XT/PR_UF (ROOFS) Specifications
BBA Certified Thermal Conductivity | 0.022 W/mK |
Facings | Low emissivity foil facings |
Core | PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 25, 30, 40, 50, 60, 70, 75, 80, 90, 100, 125, 150mm |
Board Profile | Square Edge |
SR/PR
Insulation for Pitched Roofs
Safe-R Pitched Roof on sloped roofs (ventilated, hybrid or warm) provides the most efficient U-Values with minimal intrusion into valuable living space.
The roof construction is a critical element in the building fabric and is an area at high risk of heat loss. Using SR/PR will reduce heat loss while also delivering excellent thermal bridging details.
SR/PR Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) B-s1, d0
-
Avoids intrusion into living Area
-
Reduced risk of condensation
-
Lightweight and easy to install
-
Reduced Thermal Bridging
SR/PR Specifications
BBA Certified Thermal Conductivity | 0.020 – 0.021 W/mK |
Facings | Low emissivity foil facings |
Core | Phenolic Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 50, 60, 75, 80, 100mm |
Board Profile | Square Edge |
Flat Roofs
FR/ALU
Mechanically Fixed Single Ply Waterproofing Systems
Flat Roof ALU is a high performance Polyisocyanurate flat roof insulation with vapour-tight aluminium foil facings suitable for use with single ply membranes. Flat Roof ALU is part of the comprehensive range of Unilin’s high performance flat roof boards providing total solutions for flat roof projects.
FR/ALU Key Features
-
Verified EPD available
-
High Thermal Performance
-
Compatible with mechanically fixed single ply systems. Loose laid ballasted systems
-
Vapour resistant foil facers
FR/ALU Specifications
BBA Certified Thermal Conductivity | 0.022 W/mK |
Compressive Strength | CS (10\Y) 150 |
Facings | Vapour-Resistant aluminium foil facings |
Core | PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 25, 30, 40, 50, 60, 70, 75, 80, 90, 100, 110, 120, 125, 130, 140, 150mm |
Board Profile | Square Edge |
FR/MG
Single Ply Fully Adhered/ Partially Bonded Built-Up Felt Systems
Flat Roof MG is a high performance Polyisocyanurate flat roof insulation with mineral coated glass facers suitable for use below single ply waterproofing systems (mechanically fixed or fully adhered) and partially bonded built-up felt.
FR/MG Key Features
-
Verified EPD available
-
High Thermal Performance
-
Compatible with mechanically fixed single ply systems. Loose laid ballasted systems
FR/MG Specifications
BBA Certified Thermal Conductivity | 0.024 – 0.027 W/mK |
Compressive Strength | CS (10\Y) 150 |
Facings | Mineral Glass |
Core | PIR Insulation |
Board Size | 1200mm x 1200mm |
Board Thickness | 25, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150mm |
Board Profile | Square Edge |
FR/BGM
Partially Bonded, Torched-on, Built-up Bituminous Felt Systems
Flat Roof BGM is faced with a polypropylene fleece finished bitumen/glass working surface and a mineral glass facing to the under side. Flat Roof BGM is part of Unilin’s comprehensive range of high performance flat roof boards providing total solutions for flat roof projects.
FR/BGM Key Features
-
Verified EPD available
-
High Thermal Performance
-
Compatible with most bituminous based roofing systems
-
Fleece finished bitumen/glass fibre facings
FR/BGM Specifications
BBA Certified Thermal Conductivity | 0.024 – 0.027 W/mK |
Compressive Strength | CS (10\Y) 150 |
Facings | Bitumen Glass/Mineral Glass |
Core | PIR Insulation |
Board Size | 1200mm x 1200mm |
Board Thickness | 25, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150mm |
Board Profile | Square Edge |
FR/TP
Thermal Ply High Performance PIR & Plywood Composite for Flat Roofs
Unilin Thermal Ply is a composite insulated panel of Unilin Polyisocyanurate core with a composite foil facer, bonded to 6mm WBP grade plywood. Thermal Ply is designed to provide high levels of thermal insulation and decking in one operation for new and refurbishment flat roof applications.
FR/TP Key Features
-
Verified EPD available
-
Insulation & decking in one fix
-
For new & refurbishment roofs
-
Rapid weather proofing
FR/TP Specifications
Thermal Conductivity | 0.022 W/mK |
Compressive Strength | CS (10\Y) 150 |
Facings | Composite foil facing/6mm WBP Grade Plywood |
Core | PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 56, 76, 86, 96, 106, 116mm |
Board Profile | Square Edge |
XO/XD
Partially Bonded, Self Adhered, Built-up Bituminous Felt Systems
XtroDeck is faced with an embossed aluminium facing on both sides. XtroDeck is part of Unilin’s comprehensive range of high performance flat roof boards providing total solutions for flat roof projects.
XO/XD Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) C-s2, d0
-
Superior Performance PIR Insulation
-
Compatible with most bituminous based roofing systems containing self adhered underlays with heat activated cap sheets
XO/XD Specifications
Thermal Conductivity | 0.021 W/mK |
Compressive Strength | CS (10\Y) 150 |
Facings | Robust low emissivity foil facings |
Core | PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 25, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150mm |
Board Profile | Square Edge |
Floors
ECO/MA
Solid & Suspended Floors
Bio-enhanced, superior performance PIR insulation suitable for solid and suspended floors. ECO360 MA for floors offers excellent insulation performance with a thermal conductivity of 0.020 W/mK.
This bio-enhanced insulation will significantly improve the U-Value of new and existing floors. It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for floor insulation
ECO/MA Key Features
-
Bio-enhanced PIR insulation
-
Halogen free
-
Low VOCs
-
Enhanced performance as low as 0.020 W/mK
-
Bio-degradable packaging
-
High compressive strength
-
Suitable for underfloor heating
ECO/MA Specifications
Thermal Conductivity | 0.020 W/mK |
Compressive Strength | CS (10\Y) 150 |
Facings | Robust low emissivity foil facings |
Core | Bio-enhanced PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 100, 125, 150mm |
Board Profile | Square Edge |
HYFLOOR (T&G) (XT/HYF)
Ground Supported & Suspended Floors
The floor in any building is an area of considerable downward heat loss when not properly insulated. Unilin has developed Hyfloor (T&G) engineered tongue and grooved floor insulation as the answer to achieve lower U-Values – in a practical and robust manner.
Hyfloor (T&G) has a superior thickness to performance ratio, allowing the lower targets required under Building Regulations to be achieved with minimum thickness
HYFLOOR (T&G) (XT/HYF) Key Features
-
Verified EPD available
-
Excellent 0.021 W/mK Lambda value
-
Robust tongue and groove jointing
-
High compressive strength
-
Suitable for underfloor heating
-
Perimeter strips for robust detailing
-
Reduced insulation thickness
HYFLOOR (T&G) (XT/HYF) Specifications
Thermal Conductivity | 0.021 W/mK |
Compressive Strength | CS (10\Y) 140 |
Facings | Composite foil facings |
Core | Enhanced PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 75, 100, 125, 150mm |
Board Profile | Tongue & Groove |
HYFLOOR STRIP FOUNDATION SYSTEM
Ground Supported & Suspended Floors
Hyfloor Strip Foundation System provides U-Value and Thermal Bridging performance to meet Future Homes Standard along with assurance of compressive strength at foundation level.
HYFLOOR STRIP FOUNDATION SYSTEM Key Features
-
Addresses site detailing from an early stage
-
Y-Values achieved < 0.05
-
U-Values achieved 0.11- 0.13 W/m2k
-
Using blocks suitable for multi storey buildings with a high compressive strength of 7.5 N/mm2 and 13 N/mm2
-
Complies with standard construction ACDs
-
Traditional construction, avoiding the need for engineering assurances
-
Suitable for use with built-in full fill and partial fill wall insulation
HYFLOOR STRIP FOUNDATION SYSTEM Specifications
BBA Certified Thermal Conductivity | 0.021 W/mK |
Facings | Composite foil facings |
Core | Enhanced PIR Insulation |
Board Size | 225mm & 450mm (H) |
Board Thickness | 75, 100, 125, 150mm |
Board Profile | Rebate |
XO/UF
Solid & Suspended Floors
XtroLiner Underfloor superior performance PIR offers excellent insulation performance with a thermal conductivity of 0.021 W/mK. The floor in any building is an area of considerable downward heat loss when not properly insulated.
XtroLiner Underfloor will significantly improve the U-Value of new and existing floors. It is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for floor insulation.
XO/UF Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) C-s2, d0
-
High compressive strength
-
Suitable for underfloor heating
-
Perimeter strips for robust detailing
-
Reduced insulation thickness
-
Robust textured foil
XO/UF Specifications
BBA Certified Thermal Conductivity | 0.021 W/mK |
Compressive Strength | CS (10\Y) 150 |
Facings | Robust low emissivity foil facings |
Core | Superior Performance PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 50, 60, 75, 80, 100, 120, 150mm |
Board Profile | Square Edge |
XT/PR_UF (FLOORS)
Ground Supported & Suspended Floors
The floor in any building is an area of considerable downward heat loss when not properly insulated. Thin-R Underfloor will significantly improve the U-Value of new and existing floors
Thin-R Underfloor is lightweight, easy to install and combines high compressive strength with low thermal conductivity, providing a high performance solution for floor insulation.
XT/PR_UF (FLOORS) Key Features
-
Verified EPD available
-
High compressive strength
-
Suitable for underfloor heating
-
Perimeter strips for robust detailing
-
Reduced insulation thickness
-
Low emissivity foil facings
-
Robust textured foil
XT/PR_UF (FLOORS) Specifications
BBA Certified Thermal Conductivity | 0.022 W/mK |
Compressive Strength | CS (10\Y) 150 |
Facings | Low emissivity foil facings |
Core | PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 25, 30, 40, 50, 60, 70, 90, 100, 110, 125, 140, 150mm |
Board Profile | Square Edge |
XT/WALK-R
Insulated Loft Decking
Thin-R Loft Decking Walk-R is a
composite of high performance PIR
insulation with tough OSB board that
provides safe access into insulated
roof spaces. Walk-R maintains very
high insulation values and complies
with health and safety guidelines.
XT/WALK-R Key Features
-
Verified EPD available
-
Safe access to attic space
-
High thermal performance
-
Complies with health and safety guidelines
-
Easy to install
-
Lightweight
XT/WALK-R Specifications
BBA Certified Thermal Conductivity | 0.022 W/mK |
Compressive Strength | CS (10\Y) 150 |
Facings | Low emissivity foil facings/OSB Board |
Core | PIR Insulation |
Board Size | 1200mm x 600mm |
Board Thickness | 86mm (75mm PIR + 11mm OSB Board) |
Board Profile | Square Edge |
SR/UF
Solid & Suspended Floors
Safe-R Underfloor is a superior performance rigid phenolic insulation with low emissivity aluminium facings both sides and has a thermal conductivity as low as 0.020 W/mK, delivering excellent U-Values in floors.
The floor in any building is an area of considerable downward heat loss when not properly insulated. Safe-R Underfloor will significantly improve the U-Value of new and existing floors.
SR/UF Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) D-s1, d0
-
Suitable for underfloor heating
-
Perimeter strips for robust detailing
-
Reduced insulation thickness
-
Lower lambda values for improved U-Values
SR/UF Specifications
BBA Certified Thermal Conductivity | 0.020 – 0.021 W/mK |
Compressive Strength | CS (10\Y) 120 |
Facings | Low emissivity foil facings |
Core | Phenolic Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 50, 60, 75, 80, 100, 120mm |
Board Profile | Square Edge |
Soffits
SR/ST
Soffit Application
Safe-R Soffit provides effective thermal and fire performance solutions in structural ceiling applications in commercial and residential buildings. This high performance phenolic insulation board is faced with low emissivity foil facings..
Safe-R Soffit Board is supplied as a performance, rather than a decorative product. Refer to Safe-R Soffit Plus, a high performance laminate that offers low maintenance and security protection with a surface that will accept a decorative finish.
SR/ST Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) B-s1, d0
-
Foil faced finish
-
Reduced Thermal Bridging
-
Lower lambda value for improved U-Values
SR/ST Specifications
Thermal Conductivity | 0.020 – 0.021 W/mK |
Facings | Low emissivity foil facings |
Core | Phenolic Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 50, 60, 75, 80, 100, 120mm |
Board Profile | Square Edge |
SR/STP
Soffit Application
Safe-R Soffit Plus provides effective thermal and fire performance solutions in structural ceiling applications in commercial and residential buildings
The high performance phenolic insulation board, with low emissivity aluminium foil facings, is adhesively bonded to a 6mm building panel which offers a secure finish for ease of maintenance to which a decorative finish may be applied
SR/STP Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) B-s1, d0
-
Impact resistant 6mm building panel
-
Accepts decorative finish
-
Reduced Thermal Bridging
-
Lower lambda value for improved U-Values
SR/STP Specifications
Thermal Conductivity | 0.020 – 0.021 W/mK |
Facings | Composite foil/6mm building panel |
Core | Phenolic Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 56, 66, 81, 86, 106, 126mm |
Board Profile | Square Edge |
XO/STP
Soffit Application
XtroLiner Soffit Plus provides effective thermal and fire performance solutions in structural ceiling applications in commercial and residential buildings.
The high performance modified PIR insulation board, with low emissivity textured aluminium foil facings, is adhesively bonded to a 6mm building panel which offers a secure finish for ease of maintenance to which a decorative finish may be applied.
XO/STP Key Features
-
Verified EPD available
-
Reaction to Fire (Euroclass) B-s1, d0
-
High impact resistant 6mm building panel
-
Accepts decorative finish
-
Reduced Thermal Bridging
-
Lower lambda value for improved U-Values
XO/STP Specifications
BBA Certified Thermal Conductivity | 0.021 W/mK |
Facings | Robust foil facings/6mm building panel |
Core | Superior Performance PIR Insulation |
Board Size | 2400mm x 1200mm |
Board Thickness | 56, 66, 81, 86, 106, 126mm |
Board Profile | Square Edge |
XPS
EXTRUDED POLYSTYRENE INSULATION
XPS is a high performance rigid extruded polystyrene insulation board providing a durable thermal solution to technically demanding applications where high compressive loading is a requirement.
This product is ideally suited for use in commercial, industrial and cold storage areas where vehicular traffic and loading is an issue.
XPS Key Features
-
Ideally suited for use in highly loaded and trafficked floors, basement walls and inverted roofs
-
Available as XPS 300 (300 kPa), XPS 500 (500 kPa) and XPS 700 (700 kPa)
XPS Specifications
Thermal Conductivity | 0.033 – 0.035 (W/mK)* |
Board Size | 1250 x 600mm |
Board Thickness | 30, 40, 50, 60, 80, 100, 120mm |
Board Profile | Rebated Edge |
EPS
EXPANDED POLYSTYRENE INSULATION
The Unilin Hytherm & Warm-R Insulation boards consist of rigid polystyrene boards cut from moulded blocks of white EPS Hytherm or with grey graphite enhanced EPS Warm-R
EPS Key Features
-
Verified EPD available
-
Extensive range of thicknesses
-
Available in 70 kPa or 100 kPa
EPS Specifications
Thermal Conductivity | 0.031 W/mK – Warm-R SD E Grey |
Thermal Conductivity | 0.031 W/mK – Warm-R Premium HD E Grey |
Thermal Conductivity | 0.031 W/mK – Warm-R SD E Grey EWB |
Thermal Conductivity | 0.035 W/mK – Hytherm HD White & Hytherm HD E White |
Thermal Conductivity | 0.038 W/mK – Hytherm SD White |
Core | Expanded Polystyrene |
Board Size | 2400mm x 1200mm & 1800mm x 1200mm |
Board Thickness | Various |
Board Profile | Straight Edge |
SAFE-R CLOSE-R
CAVITY CLOSERS
A high performance EN fire-rated cavity closer providing compliance with structural and thermal regulations. Structural failures in cavity walls are largely due to the incorrect placement of wall ties within the cavity. Openings at windows and doors require additional wall ties to be placed at a maximum 225mm into the cavity at every course of block. It is also a requirement under Approved Document A (England and Wales) that additional wall ties must be placed at gable end openings and either side of expansion joints.
These extra structural ties interrupt the continuity of the insulation layer and increase Thermal Bridging issues at very vulnerable areas, with mould growth most evident at reveals. Safe-R Close-R achieves an excellent fire rating and allows for the correct placement of wall ties to meet Approved Document A (England and Wales) structural requirements. The superior insulation performance attains Passive & Future Homes Standards for Thermal Bridging.
SAFE-R CLOSE-R Key Features
-
Verified EPD available
-
Achieved in excess of 4 hour fire rating in a 150mm cavity when tested to EN1366-4
-
Provides template for wall ties placement
-
Ensures continuity of insulation
-
Suitable for door, window, eaves and openings
-
Suitable for use at expansion joints
SAFE-R CLOSE-R Specifications
Facings | Plastic encapsulated stonewool |
Core | Phenolic Insulation |
Board Size | 1200mm x 200mm |
Suitable for Cavity Widths | 100, 125, 150mm* |
Board Profile | Square Edge |
CLOSE-R
INSULATED CAVITY CLOSER
Unilin Close-R fully insulated cavity closers are a cost effective solution for closing cavities around window and door openings, preventing cold bridging, damp penetration, air infiltration and condensation
The Close-R range is used to close cavities and is suited to all types of windows and doors and is available in sizes to fit cavity widths from 100mm – 150mm, with checked detail to suit brick or drylined specifications and flanged detail to suit block outer facings. (Flanged detailing requires precise construction tolerances.)
CLOSE-R Key Features
-
Saves time and cost effective
-
Suits 100 – 150mm cavities
-
Available from Builders Merchants
-
Reduces thermal bridging around openings
CLOSE-R Specifications
For further assistance please contact the Unilin Technical team
Join our mailing list.
Stay informed of the latest developments with the Unilin Insulation mailing list
"*" indicates required fields
Resources
Have a look at our brochures, technical files and other documents